Motorola APX 4000Li Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 102

Motorola APX 4000Li Скачать руководство пользователя страница 69

• You hear the radio sounds an alternating tone for

multikey radios.

The KVL indicates that keyload is successful.

Multikey Feature

This feature allows the radio to be equipped with different
encryption keys and supports the DES-OFB algorithm.

There are two types of encryption keys:

Conventional Multikey

The encryption keys are strapped on a one-per-channel
basis, through CPS. In addition, you can have operator-
selectable keys, operator-selectable keysets, and
operator-selectable key erasure. If talkgroups are
enabled in conventional, then the encryption keys are
strapped to the talkgroups.

Trunked Multikey

If the radio is used for both conventional and trunked
applications, strap the encryption keys for trunking on a
per-talkgroup or announcement-group basis. In
addition, a different key can be strapped to other
features, such as dynamic regrouping, failsoft, or
emergency talkgroup. You can have operator-selectable
key erasure.

Erasing the Selected Encryption Keys

This feature allows you to erase all or selected encryption
keys.

• Erasing the single key in radios with the single-key

option and erasing all keys in radios with the
multikey option by using the preprogrammed

Top

Side (Select)

button and

Top (Orange)

button:

a. Press and hold the

Top Side (Select)

button.

b. While holding

Top Side (Select)

button down,

press the

Top (Orange)

button.

The display shows

Please wait

. When all the

encryption keys have been erased, the display
shows

All keys erased

.

NOTICE:

Do

not

press the

Top (Orange)

button

before pressing the

Top Side (Select)

button, unless you are in an emergency
situation as this sends an emergency
alarm.

English

69

«
...
67
68
69
70
71
...
»

Содержание APX 4000Li







































































































Отзывы:

Нет отзывов