Motorola APX 4000Li Скачать руководство пользователя страница 53

Страница: 53 / 102

The Direct or “talkaround operation” allows you to bypass
the repeater and connect directly to another radio. The
transmit and receive frequencies are the same.

Perform one of the following actions:

The display shows

Repeater mode

if the radio is currently

in Repeater mode.
The display shows

Direct mode

and the Talkaround icon if

the radio is currently in Direct mode (during conventional
operation only).

Monitor Feature

The monitor feature is used to make sure that a channel is
clear before transmitting.

The lack of static on a digital channel when the users
switch from analog to digital radios is not an indication that
the radio is malfunctioning.

Digital technology quiets the transmission by removing the
noise from the signal and allows only the clear voice or
data information to be heard.

Monitoring a Channel

Do one of the followings to monitor a channel. You can use
these options interchangeably depending on your
preference and the programmed functions.

• Monitoring a Channel with

Monitor

button.

a. Press the preprogrammed

Monitor

button.

b. Adjust the

Volume Control Knob

if necessary.

c. Press and hold the

PTT

button to transmit.

The LED lights up solid red.

d. Release the

PTT

button to receive (listen).

The Carrier Squelch indicator appears on the
display when you monitor a channel using the
preprogrammed

Monitor

button.

• Monitoring a Channel using the selected zone

channel.

a. Select the desired zone and channel.

b. Listen for a transmission.

c. Adjust the

Volume Control Knob

if necessary.

English

Send Feedback

Содержание APX 4000Li






































































































Результаты поиска

Содержание APX 4000Li

Отзывы:

Motorola APX 4000Li, Руководство пользователя, Страница: 53 / 102

Результаты поиска

Содержание APX 4000Li

Отзывы: