manualshive.com logo in svg

Motorola AP6562E, Руководство по установке

Поделиться
Скачать
Motorola AP6562E Скачать руководство пользователя страница 36

36

AP6562E Access Point

5.3.3    Safety in Hospitals

Wireless devices transmit radio frequency energy and may affect medical electrical equipment. When 
installed adjacent to other equipment, it is advised to verify that the adjacent equipment is not adversely 
affected.

Pacemakers

Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld 
wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are 
consistent with independent research and recommendations by Wireless Technology Research.

Persons with Pacemakers:

• Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON.

• Should not carry the device in a breast pocket.

• Should use the ear furthest from the pacemaker to minimize the potential for interference.

• If you have any reason to suspect that interference is taking place, turn OFF your device. 

Other Medical Devices

Please consult your physician or the manufacturer of the medical device, to determine if the operation of your 
wireless product may interfere with the medical device.

5.4    RF Exposure Guidelines

Safety Information

Reducing RF Exposure - Use Properly

Only operate the device in accordance with the instructions supplied.

5.5    International

The device complies with internationally recognized standards covering human exposure to electromagnetic fields 
from radio devices. For information on "International" human exposure to electromagnic fields refer to the 
Motorola Declaration of Conformity (DoC) at 

http://www.motorolasolutions.com/doc

For further information on the safety of RF energy from wireless devices - see

http://responsibility.motorolasolutions.com/index.php/ourapproach/wirelessscomhealth

5.6    Europe

Remote and Standalone Antenna Configurations

To comply with EU RF exposure requirements, antennas that are mounted externally at remote locations or 
operating near users at stand-alone desktop of similar configurations must operate with a minimum separation 
distance of 20 cm from all persons.

Содержание AP6562E

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды