manualshive.com logo in svg

Motorola AP6562E, Руководство по установке

Поделиться
Скачать
Motorola AP6562E Скачать руководство пользователя страница 14

14

AP6562E Access Point

11. Verify the unit has power by observing that the LEDs are lit or flashing.

To use the extension arm with the mounting hardware kit

:

1.

Attach the pole mount section at the desired mounting location using a U-bolt or band clamps.

2.

Complete the steps for assembling and positioning the mounting bracket sections for poles less than or 
greater than 3 inches (see 

Vertical Pole Mount on page 12

).

3.

Using a torque wrench or a ratchet and a 10mm socket, or an adjustable wrench, attach the extension arm 
to the Access Point bracket section with four M6 hex flange screws. Tighten the hex flange screws to 60 
inch pounds (lbf-in).

4.

With the Access Point properly positioned, attach the extension arm to the Access Point with four M6 hex 
flange screws. Tighten the hex flange screws to 60 inch pounds (lbf-in).

5.

If required, install and attach a Kensington security cable (customer supplied) to the unit’s lock port.

6.

Attach an Ethernet cable from the Access Point to a controller with an 802.3at-compatible power source 
oruse the designated outdoor rated power supply (AP-PSBIAS-7161-US or AP-PSBIAS-7161-WW) to 
supply power to the AP6562E (once fully cabled).

7.

Verify the unit has power by observing that the LEDs are lit or flashing.

CAUTION

If not using a 802.3at capable controller to power the AP6562E, 
ensure only the AP6562E’s designated outdoor power supply 
(AP-PSBIAS-7161-US or AP-PSBIAS-7161-WW) is used to supply 
power to the Access Point. Using an incorrectly rated power supply 
could damage the unit and void the product warranty. Do not actually 
connect to the power source until the cabling portion of the 
installation is complete.

CAUTION

If not using a 802.3at capable controller to power the AP6562E, 
ensure only the AP6562E’s designated outdoor power supply 
(AP-PSBIAS-7161-US or AP-PSBIAS-7161-WW) is used to supply 
power to the Access Point. Using an incorrectly rated power supply 
could damage the unit and void the product warranty. Do not actually 
connect to the power source until the cabling portion of the 
installation is complete.

!

!

Содержание AP6562E

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды