Motorola AP-7562 Скачать руководство пользователя страница 42

Страница: 42 / 68

AP-7562 Access Point

If selecting

Secure-802.1x

, provide an IP address (or hostname) and a shared secret (password)

used to access an external RADIUS server resource designated to validate user requests to the
Access Point’s WLAN resources.
Selecting

Guest

displays fields for captive portal Web page creation, and is beyond the scope of

this basic Access Point configuration.

•

Band -

Select the 2.4 GHz and/or 5 GHz radio bands supported by the Access Point and its connected

client traffic. If this Access Point is designated as a Virtual Controller AP, both radio bands should be
enabled.

•

VLAN

- Use the spinner control to specify a VLAN from 1 - 4,094 for this WLAN. When a client

associates with a WLAN, the client is assigned a VLAN by load balance distribution. Its
recommended you do not use VLAN 1 with the WLAN if the WAN port has been enabled.

•

Description

- Optionally enter a WLAN description to further describe the WLAN’s deployment

objective.

18. Select

Apply

to commit the updates to the Access Point’s WLAN configuration.

19. Expand the

Configuration

menu item and select

Services

20. Select

Enable DHCP Server

to ensure the Access Point can provision IP addresses to requesting clients

over the specified interface.

NOTE

A VLAN must be already configured and available to the DHCP server as
a viable interface between the Access Point and requesting client. Refer
to the

LAN IP Interface Settings

field (within the Edit Access Point

screen), and add a VLAN.

Содержание AP-7562





































































Результаты поиска

Содержание AP-7562

Отзывы:

Похожие инструкции для AP-7562

Бренды по названию

Популярные бренды

Motorola AP-7562, Руководство по установке

Результаты поиска

Содержание AP-7562

Отзывы:

Похожие инструкции для AP-7562

Бренды по названию

Популярные бренды