Motorola AP 7181, Руководство по установке, Страница: 75 / 96

Getting Started 69
3.2.2 Configuring WLAN Security Settings
By default the AP 7181 has a default security policy of No Security. In the following
example a WPA2/CCMP security policy will be configured that can be applied to newly
created WLANs.
To configure a basic security policy for a WLAN:
1. From the access point Quick Setup screen, click the Create button to the right of
the Security Policy item.
2. Ensure the Name of the security policy entered suits the intended configuration or
function of the policy.
NOTE
Even an access point with minimal configuration values must be
protected against data theft and corruption. A security policy
should be configured for WLAN1 as part of the basic
configuration outlined in this guide. A security policy can be
configured for the WLAN from within the Quick Setup screen.
Policies can be defined over time and saved to be used as needed
as security requirements change. Motorola recommends you
familiarize yourself with the security options available on the
access point before defining a security policy.
CAUTION
Multiple WLANs can share the same security policy. Avoid
naming security policies after specific WLANs to eliminate the
risk of limiting a WLAN to single policy. Motorola
recommends naming the policy after the attributes of the
authentication or encryption type selected.
!