Motorola AP-7131N-FGR Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 66

Motorola AP-7131N-FGR Скачать руководство пользователя страница 43

Basic Configuration

39

5.

Configure the

Key Settings

to set an 256-bit key.

Default (hexadecimal) 256-bit keys for WP2A/CCMP include:

1011121314151617

18191A1B1C1D1E1F

2021222324252627

28292A2B2C2D2E2F

6.

Configure the

Fast Roaming (802.1x only)

field as required to enable additional AP-7131

roaming and key caching options. This feature is applicable only when using 802.1x EAP
authentication with WPA2/CCMP.

7.

Click the

Apply

button to save the security policy and return to the

AP-71XX Quick Setup

screen.

At this point, you can either restrict specific MU access to the access point (using the ACL)
or test the access point for MU interoperability.

3.4.2 Excluding MUs from Association

Optionally, use the access point

Access Control List ACL

to specify which MUs can or cannot gain

access to an access point managed WLAN. By default, all mobile units can gain access. For specific

256-bit Key

Use a hexadecimal value, and enter 16 hexadecimal characters into
each of the four fields displayed.

Pre-Authentication

Selecting this option enables an associated MU to carry out an
802.1x authentication with another AP-7131 before it roams to it.
The AP-7131 caches the keying information of the client until it
roams to the other AP-7131. This enables the roaming client to
start sending and receiving data sooner by not having to do 802.1x
authentication after it roams. This feature is only supported when
802.1x EAP authentication is enabled.

NOTE

PMK key caching is enabled internally by default when 802.1x EAP
authentication is enabled.

«
...
41
42
43
44
45
...
»

Содержание AP-7131N-FGR



































































Отзывы:

Нет отзывов