Motorola AP-7131N-FGR Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 66

Motorola AP-7131N-FGR Скачать руководство пользователя страница 18

Motorola Solutions AP-7131N-FGR Access Point Installation Guide

14

11. Slide the access point down along the mounting surface to hang the mount slots on the

screw heads.

12. Cable the access point using either the Power Injector solution or an approved line cord and

power supply.

For Motorola Solutions Power Injector installations:

a. Connect a RJ-45 CAT5e (or CAT6) Ethernet cable between the network data supply (host)

and the Power Injector

Data In

connector.

b. Connect a RJ-45 CAT5e (or CAT6) Ethernet cable between the Power Injector

Data &

Power Out

connector and the access point GE1/POE port.

c. Ensure the cable length from the Ethernet source (host) to the Power Injector and

access point does not exceed 100 meters (333 ft). The Power Injector has no On/Off
power switch. The Power Injector receives power as soon as AC power is applied. For
more information on using the Power Injector, see

Power Injector System on page 8

.

For standard power adapter (non Power Injector) and line cord installations:

a. Connect a RJ-45 CAT5e (or CAT6) Ethernet cable between the network data supply (host)

and the access point’s GE1/POE or GE2 port.

b. Verify the power adapter is correctly rated according the country of operation.

c. Connect the power supply line cord to the power adapter.

d. Attach the power adapter cable into the power connector on the access point.

e. Attach the power supply line cord to a power supply.

CAUTION

Ensure you are placing the antennas on the correct connectors to
ensure the successful operation of the AP-7131N-FGR access point.

NOTE

It is recommended the access point be mounted with the RJ45 cable
connector oriented upwards or downwards to ensure proper operation.

CAUTION

Do not actually connect to the power source until the cabling portion
of the installation is complete.

!

!

«
...
16
17
18
19
20
...
»

Содержание AP-7131N-FGR



































































Отзывы:

Нет отзывов