Installation Guide
19
•
Router Mode
-In Router Mode, the Access Point routes traffic between the
local network
(LAN) and
the Internet or
external network
(WAN). Router mode is recommended in a deployment supported by
just a single Access Point.
•
Bridge Mode
- In Bridge Mode, the Access Point depends on an external router for routing LAN and
WAN traffic. Routing is generally used on one device, whereas bridging is typically used in a larger
density network. Select Bridge Mode when deploying this Access Point with numerous peer Access
Points supporting clients on both the 2.4GHz and 5GHz radio bands.
14. Select
Next
. The Typical Setup Wizard displays the
LAN Configuration
screen to set the Access Point's
LAN interface configuration.
NOTE
When Bridge Mode is selected, WAN configuration cannot be performed
and the Typical Setup Wizard does not display the WAN configuration
screen.
Содержание AP 6522M
Страница 1: ...AP 6522M Access Point INSTALLATION GUIDE ...
Страница 45: ...Installation Guide 45 ...
Страница 46: ...46 AP 6522M Access Point ...
Страница 47: ...Installation Guide 47 ...