background image

Installation Guide

35

6

Motorola Solutions, Inc. End-User License Agreement

BY DOWNLOADING, INSTALLING, OR USING THE SOFTWARE DESCRIBED IN THIS DOCUMENT, YOU OR THE ENTITY OR COMPANY THAT 
YOU REPRESENT ("LICENSEE") ARE UNCONDITIONALLY CONSENTING TO BE BOUND BY AND ARE BECOMING A PARTY TO THIS LICENSE 
AGREEMENT ("AGREEMENT"). LICENSEE'S USE OR CONTINUED USE OF THE DOWNLOADED OR INSTALLED MATERIALS SHALL ALSO 
CONSTITUTE ASSENT TO THE TERMS OF THIS AGREEMENT. IF LICENSEE DOES NOT UNCONDITIONALLY AGREE TO ALL OF THE TERMS 
OF THIS AGREEMENT, DO NOT CONTINUE THE INSTALLATION PROCESS. IF THESE TERMS ARE CONSIDERED AN OFFER, ACCEPTANCE IS 
EXPRESSLY LIMITED TO AND EXPRESSLY CONTINGENT UPON THESE TERMS. IF YOU ARE ACCEPTING THESE TERMS ON BEHALF OF A 
COMPANY, ANOTHER PERSON OR ANY OTHER LEGAL ENTITY, YOU REPRESENT AND WARRANT THAT YOU HAVE THE AUTHORITY TO 
BIND THAT COMPANY, PERSON OR ENTITY.

1

LICENSE GRANT. Subject to the terms of this Agreement, Motorola, Inc. and/or its subsidiaries ("Licensor") hereby grants Licensee a 
limited, personal, non-sublicensable, non-transferable, nonexclusive license to use the software that Licensee is about to download 
or install and the documentation that accompanies it (collectively, the "Software") for Licensee's personal use in connection with 
hardware produced by Licensor and only in accordance with the accompanying documentation. Licensee may download, install and 
use the Software only on a single computer. Licensee may make one copy of the Software (excluding any documentation) for backup 
purposes, provided that copyright and other restricted rights notices of Licensor and its suppliers are reproduced exactly.

2

LICENSE RESTRICTIONS. Except as expressly permitted by this Agreement, Licensee shall not, nor permit anyone else to, directly or 
indirectly: (i) copy (except for one backup copy), modify, distribute or create derivative works based upon the Software; (ii) reverse 
engineer, disassemble, decompile or otherwise attempt to discover the source code or structure, sequence and organization of the 
Software; or (iii) rent, lease, or use the Software for timesharing or service bureau purposes, or otherwise use the Software for any 
commercial purpose/on behalf of any third party. Licensee shall maintain and not remove or obscure any proprietary notices on the 
Software, and shall reproduce such notices exactly on all permitted copies of the Software. All title, ownership rights, and intellectual 
property rights in and to the Software, and any copies or portions thereof, shall remain in Licensor and its suppliers or licensors. 
Licensee understands that Licensor may modify or discontinue offering the Software at any time. The Software is protected by the 
copyright laws of the United States and international copyright treaties. The Software is licensed, not sold. This Agreement does not 
give Licensee any rights not expressly granted herein.

3

INTELLECTUAL PROPERTY; CONTENT. All title and intellectual property rights in and to the Software (including but not limited to any 
images, photographs, animations, video, audio, music, text and "applets" incorporated into the Software), and any copies you are 
permitted to make herein are owned by Licensor or its suppliers. All title and intellectual property rights in and to the content which 
may be accessed through use of the Software is the property of the respective content owner and may be protected by applicable 
copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content. As a condition to 
Licensee's use of the Software, Licensee represents, warrants and covenants that Licensee will not use the Software: (i) to infringe 
the intellectual property rights or proprietary rights, or rights of publicity or privacy, of any third party; (ii) to violate any applicable law, 
statute, ordinance or regulation; (iii) to disseminate information or materials in any form or format ("Content") that are harmful, 
threatening, abusive, harassing, tortuous, defamatory, vulgar, obscene, libelous, or otherwise objectionable; or (iv) to disseminate any 
software viruses or any other computer code, files or programs that may interrupt, destroy or limit the functionality of any computer 
software or hardware or telecommunications equipment. Licensee, not Licensor, remains solely responsible for all Content that 
Licensee uploads, posts, e-mails, transmits, or otherwise disseminates using, or in connection with, the Software.

4

FEES; SUPPORT AND UPGRADES. Licensor may, at Licensor's sole option, provide support services related to the Software ("Support 
Services"). Nothing in this Agreement grants Licensee any right to receive any Support Services. Use of any Support Services provided 
is governed by the Licensor policies and programs described in the user manual, in "online" documentation, and/or in other 
Licensor-provided materials or support agreements. Any supplemental software code provided to you as part of any Support Services 
shall be considered part of the Software and subject to the terms and conditions of this EULA. With respect to technical information 
you provide to Licensor as part of any Support Services, Licensor may use such information for its business purposes, including for 
product support and development. Licensor will not utilize such technical information in a form that personally identifies Licensee.

5

TERMINATION. Either party may terminate this Agreement at any time, with or without cause, upon written notice. Any termination of 
this Agreement shall also terminate the licenses granted hereunder. Upon termination of this Agreement for any reason, Licensee 

Содержание AP-0622









































Отзывы: