manualshive.com logo in svg
background image

Notice (continued)

Proprietary Material

Information and software in this document are proprietary to Motorola, Inc. (or its Suppliers) 
and without the express prior permission of an officer of Motorola, may not be copied, 
reproduced, disclosed to others, published, or used, in whole or in part, for any purpose other 
than that for which it is being made available. Use of software described in this document is 
subject to the terms and conditions of the Motorola Software License Agreement.

This document is for information purposes only and is subject to change without notice.

Radio Frequency Interference Regulations

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against interference in a residential installation. This equipment generates, uses, 
and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the interference by 
one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

– Consult the dealer or an experienced radio/TV technician to help.

Changes or modifications not expressly approved by Motorola could void the user's authority 
to operate the equipment.

Notification of Canadian Requirements

This digital apparatus does not exceed the Class B limits for radio noise emissions from 
digital apparatus as set out in the Radio Interference Regulations of the Canadian Department 
of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites 
applicable aux appareils numériques de classe B prescrites dans le règlement sur le brouillage 
radioélectrique édicté par let Ministère des Communications du Canada. 

Note to CATV System Installers in the USA

This reminder is provided to call the cable TV system installer’s attention to Article 820-40 
of the National Electrical Code (NFPA 70) that provides guidelines for proper grounding and, 
in particular, specifies that the cable shield shall be connected to the grounding system in the 
building, as close to the point of cable entry as practical. 

Part No. 475866-001-00, Rev A. 6/2000

Publication Code: 

Содержание AL 200
















































Отзывы: