Motorola AirDefense Model 510, Руководство по установке

Страница: 35 / 48

Sensor UI 29
After you enter or change configuration information on the Configure Sensor tab, use the buttons
along the bottom of the screen to:
•
Cancel
—discards changes.
•
Save Basic Settings
—applies changes and saves them on the AirDefense server.
The following screen shows the confirmation you see after your changes are saved and the sensor is
about to reboot.
Use DHCP Select the option of setting up your Sensor to use DHCP. It
is enabled by default. If you do not want to use DHCP,
choose
No
, and then type the sensor's:
• IP Address
• Netmask
• Gateway IP Address.
Obtain DNS Automatically Automatically obtaining DNS is disabled by default. If you
want to automatically obtain DNS, select the
Yes
button. If
not, leave the
No
button selected, and then type the
following:
• Primary DNS
• Secondary DNS
• Domain Name.
New Admin Password/
Verify Admin Password
To change the password for an admin user, type the new
password, and then verify it by typing it again.
New Monitor Password/
Verify Monitor Password
To change the password for a monitor user, type the new
password, and then verify it by typing it again.
Setting Description