Motorola AirDefense Model 510, Руководство по установке

Страница: 14 / 48

Model 510 Sensor: Installation Guide 8
3.2.8 LEDs
The 510 has three Light Emitting Diodes (LEDs) that indicate sensor status. The standard orientation
or positioning for the Model 510 Sensor is to have all LEDs at the bottom of the device (smiley face).
Following is a description of the individual LED indicators:
• LED 1 (bottom left) = Radio Activity Indicator
• LED 2 (center) = Power & Hardware Indicator
• LED 3 (bottom right) = Network Connectivity Indicator
LEDs LED Appearance Description Possible Cause
& Remedy
LED 1: blinking
GREEN
LED 2: solid GREEN
LED 3: solid GREEN
Sensor is receiving
power, is
connected to the
server, and is
detecting radio
traffic.
Sensor is operating
correctly.
LED 1: off
LED 2: solid AMBER
LED 3: off
Hardware problem. Radio(s) not
functioning properly or
other hardware failure.
Contact AirDefense
customer support.
LED 1: off
LED 2: solid GREEN
LED 3: off
Sensor is receiving
power, has not yet
established a
network
connection.
Sensor is likely in
process of booting up.
Wait approximately
one minute for process
to complete. Check
network cable
connections.
LED 1: off
LED 2: solid GREEN
LED 3: blinking
AMBER
Sensor is receiving
power, a
connection to the
switch has been
established, but
sensor is not
receiving a DHCP
address.
No DHCP server
available on network.
Consider setting a
static IP address on
the sensor.