Motorola AC1600 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 66

Motorola AC1600 Скачать руководство пользователя страница 49

When you have completed all Whitelists, remember to Enable Parental Control at

the top of the page, and click Save.

Setting up Times when Internet Access is Allowed and Not
Allowed

Before you make any changes, make sure Parental Control at the top of the page
is Disabled, and click Save if you had to change this.

You can set up times when Internet is allowed by configuring a Whitelist entry
with a universal URL. By doing this, you can allow Internet access for a particular

device only during hours that you specify. Access will be allowed to all Internet
sites. Internet access will not be allowed to any site outside of the hours that you

specify.

Under the tab, List of Allowed Addresses (Whitelist), click the Add button to the

right. A set of fields will appear. Give your Whitelist a name, and then type in the

MAC Address of the device you want your Whitelist to apply to. Use the format
XX:YY:ZZ:WW:VV:UU.

In this case, enter . (that is, the single character ‘dot’ or ‘period’) as the URL.

Parental Control will interpret this to apply to all websites.

«
...
47
48
49
50
51
...
»

Содержание AC1600



































































Отзывы:

Нет отзывов