Motorola A009, Руководство по обслуживанию, Страница: 41 / 60

6881037B20 37
Level III Service Manual Troubleshooting
Troubleshooting
Console Mode (Manual) Test
The Motorola A009 communicator is equipped with a manual test mode capability
(console mode test). This capability allows service personnel to verify functionality
and perform fault isolation by entering keypad commands.
To enter the console mode test:
1. From the desktop, enter the key sequence <?><?><?><c><o><n><s>.
2. A diagnostic menu will be displayed after several seconds.
3. Choose menu item 1 to test controller functions.
4. Choose menu item 2 to test transceiver functions.
5. Choose menu item 3 to exit to the desktop.
Tables 6 and 7 list available transceiver and controller test commands.
Console Mode (Manual) Test Commands
Table 6. Transceiver Test Commands
Test Command Test Function/Name
Enter key sequence
<?><?><?><c><o><n><s> Enter console mode test
01<Enter> Exit transceiver tests
07<Enter> Mute receive (RX) audio path
08<Enter> Unmute RX audio path
09<Enter> Mute transmit (TX) audio path
10<Enter> Unmute TX audio path
15xx<Enter> Generate tone
16<Enter> Mute tone generator
19<Enter> Display software version number of Call Processor
20<Enter> Display software version number of Modem
36<Enter> or 36x<Enter> Initiate acoustic loopback
37<Enter> Stop test
38<Enter> Activate SIM
39<Enter> Deactivate SIM
43x<Enter> Change audio path
47xx<Enter> Set audio volume
51<Enter> Enable sidetone
52<Enter> Disable sidetone
57<Enter> Initialize non-volatile memory
58<Enter> Display security code
58xxxxxx<Enter> Modify security code
59<Enter> Display lock code
59xxx<Enter> Modify lock code
60<Enter> Display IMEI
*Note: To access these options, you must first type the primary access code.
1 and 2
C22
6881037B20