Motorola 7528X, Руководство пользователя

Страница: 25 / 210

Basic Operation 1 - 5
Switching the Workabout Pro4 Off
• To switch off the Workabout Pro4, press the [Power] button. The Workabout Pro4 will automatically enter
the Suspend state.
Resetting the Workabout Pro4
To perform a variety of Workabout Pro4 resets, you can use the keyboard shortcuts described below.
Performing a Warm Reset
During a warm reset , running programs are halted. The contents of the file system, Application directory (Flash
Disk), and the registry are preserved. Keep in mind, however, that RAM content is not preserved.
• Press and hold down the [FN/BLUE] key and the [Power] button simultaneously for a minimum of
four seconds.
The Motorola splash screen appears, and the unit resets.
Performing a Cold Reset
A cold reset reinitializes all hardware. All RAM including the RAM disk is erased. Non-volatile storage such as
the Application directory (Flash disk) is preserved, as is the file system.
To execute a cold reset:
• Press and hold down the [FN/ORANGE] key, the [FN/BLUE] key, and the [Power] button, simultane-
ously for a minimum of four seconds.
Performing a Clean Start
A clean start returns the Workabout Pro4 to factory settings, flushes the registry keys and deletes volatile
storage.
• Press and hold down the [FN/BLUE] key, the [Power] button and the [SCAN] key simultaneously for a
minimum of six seconds.
The Workabout Pro4 displays the Boot to BooSt menu.
• On an alpha keyboard , type .clean .
• On a numeric keyboard , type .25326 .
IMPORTANT
Turning off the hand-held does not result in a complete shutdown;
rather, the unit enters a power-saving, “suspend” state. When the
Workabout Pro4 is turned on from suspend state, operation
resumes within a few seconds.
To shut down the unit, press and hold down the [Power] button until
the
Power Option screen is displayed where you can choose the
Power off option.
NOTE
You do not need to reset your unit after configuring the radio.
Draft #6