Motorola solutions PMPN4308, Быстрый старт

Страница: 12 / 120

10
En
glish
Figure 3 : Mounting Multi-Unit Charger to Wall Bracket
Mounting Multi-Unit Charger to Wall Bracket
1. Position the wall mount bracket in the desired position, and mark the location of the
mounting holes on the wall surface.
.
2. Mount bracket to wall using the appropriate mounting hardware required for the type of
wall material fixture it is being mounted to. Drill based on the marked mounting holes
on the wall surfaces.
3. Secure the wall bracket in position by installing mounting hardware over the mounting
holes on the wall bracket tightly.
Note: It is recommended to use 10-16x1-1/2” tapping screw and washer (not included) on
wood stud and solid-flat concrete/brick wall.
4. Hang the MUC on wall bracket as shown in Figure 3.
Additional Features and Information
The complete online user guide is available through publication part number MN003725A01
at https://www.motorolasolutions.com/content/learning/en_us/documentation-portal/
accessories-_-energy/chargers.html. This guide provides information on features of the
IMPRES 2™ Maintenance Multi-Unit Chargers.
Attach to
wall in
four
locations
Wall
Wall
Ensure the area behind the mounting surface is always free of electrical wires,
cables, and pipes before cutting, drilling, or installing the mounting screws.
MN003724A01.book Page 10 Friday, March 20, 2020 3:45 PM