Motorola solutions PMMN4135 Series, Руководство пользователя

Страница: 6 / 98

Foreword
RF Energy Exposure and Product Safety Guide for Portable
Two-Way Radios
CAUTION:
Before using this accessory, read this guide which contains important operating instructions for
safe usage and RF energy awareness and control for compliance with applicable standards and
regulations.
The Remote Speaker Microphone (RSM), when attached to the radio, is restricted to
occupational use only to satisfy FCC/ICNIRP RF energy exposure requirements. Before using
this product, read the RF energy awareness information and operating instructions in the
Product Safety and RF Exposure booklet enclosed with your radio to ensure compliance with
RF energy exposure limits.
For information on intrinsic and/or nonincendive safety certification, refer to the Approval
manual that ships with your radio.
Acoustic Safety
Exposure to loud noises from any source for extended periods of time may temporarily or permanently
affect your hearing. The louder the radio volume, the less time is required before your hearing could
be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a
cumulative effect. To protect your hearing:
• Use the lowest volume necessary to do your job.
• Turn up the volume only if you are in noisy surroundings.
• Turn down the volume before wearing the headset or earpiece.
• Limit the amount of time you use headsets or earpieces at high volume.
• When using the radio without a headset or earpiece, do not place the radio speaker directly against
your ear.
• If you experience hearing discomfort, ringing in your ears, or speeches that are muffled, you should
stop listening to your radio through your headset or earpiece, and have your hearing checked
by your doctor. To change the volume level, refer to Radio Product Safety Leaflet or Customer
Programming Software (CPS) for Surveillance extra loud (xL) Kit Configurations.
Warranty
Motorola Solutions offers warranty for your RSM. Refer to your Motorola Solutions dealer or point-of-
purchase for detailed information.
NOTE: Warranty is void after customer replacement of any parts other than replacement parts
listed.
MN008918A01-AA
Foreword
6