Motorola solutions PMLN7093, Руководство пользователя

Страница: 7 / 122

5
If there is NO LED indication:
1. Check if the radio with battery, or the battery alone, is inserted correctly (refer to
step 3 on page 6).
2. Make sure the power cord is securely plugged into the charger and an appropriate
AC outlet and that there is power to the outlet.
3. Confirm that the battery used with the radio is listed in Table 2.
Red Fast
Flash
Error
•
The Charger identified the
Battery as invalid or damaged
• The Charger may have
detected an open or shorted
Battery contact
• Excessive Power Supply
Voltage
• Battery Under-Voltage
Recovery Timeout (15
minutes)
• Charging Issue
Remove the battery from the
pocket. Inspect the charger and
battery contacts to ensure they are
clean. Reinsert the battery.
If the indication continues,
disconnect the power cord from the
bottom of the charger and inspect
the power cord and charger
connectors to ensure they are
clean and ready for use.
Connect an authentic Motorola
Solutions power cord to the
charger.
If the indication continues,
try using a different Motorola
Solutions authorized battery.
If the indication continues with a
different battery, contact your
Motorola Solutions representative.
Steady Red
Charging The battery is charging.
Steady
Green
Fully Charged The battery may be used.
Flashing
Yellow
Standby The charger is on standby mode.
Table 4: Charger LED Indicator (Continued)
LED
Indication Charger State Comment