Version 1.5
© Openpath 2021
10
l
Install the Open Admin app
o
o
l
If using a laptop instead of the app, the laptop must be on the same network as
the SDC. If you have a VLAN, make sure the laptop is on the same VLAN as the
SDC.
l
If using a laptop running Windows or Linux, you must download
. The
provisioning process uses Bonjour software that comes with iTunes. Optionally,
you can download iTunes and you an archive utility to extract and install only
the Bonjour MSI.
CREATE SDC
To add multiple SDCs with Quick Start:
1. Go to
https://control.openpath.com/login
2. Go to Administration > Quick Start
3. Enter a
Site Name
and any other relevant site information (optional), then click
Next
4. Enter how many controllers are located at your Site:
a. Enter names for the controllers
b. From the Controller Type dropdowns, select Single Door Controller (SDC)
c. Enter the number of expansion boards connected to the controllers, then
select the types used:
i.
Openpath 4-Port Expansion
ii.
Openpath 8-Port Expansion
iii.
Openpath 16-Port Elevator
d. Click
Next
5. Enter how many Readers are connected to the controllers and enter names,
then click
Next
6. Review your Site Details, then click
Confirm & Submit
. It may take a few minutes
for setup to complete.
To add one SDC
1. To add a new SDC, click the
Add ACU
button (+)
2. Enter a name for the SDC
3. If your SDC also connects to an expansion board, then from the
Add Expansion
Board
dropdown, select and add the appropriate type(s):
