5
En
gl
is
h
Replacing the Coil Cord
To remove the cord (disassembly):
1. With the front of the RSM facing down, remove the
screws from the rear of the microphone using a Phillips
type screwdriver. Retain the screws for reuse.
2. Remove the rear housing by lifting it straight up and
away from the front housing (See Figure 2 below).
Figure 2.
3. Unplug the coil cord connector plugs from the circuit
board connector jacks.
4. Lift the cord with the rubber strain relief out of the front
housing (See Figure 3 below).
Figure 3
6871518M01.book Page 5 Wednesday, May 27, 2020 11:34 PM