4
English
The combination of radio, RSM and/or secondary
accessory should be worn properly as such the RSM
cord would not cross over or touch either the radio’s
antenna and/or secondary accessory.
Receiving
When the RSM is connected to the radio accessory
connector, the radio’s speaker is muted, and the audio is
only heard from the RSM speaker. Similarly, when a
secondary receiver audio accessory is plugged into the
3.5 mm audio jack, audio to the RSM is rerouted to the
secondary accessory.
Transmitting
To transmit using your RSM:
1. Press and hold the Push-To-Talk (PTT) button on the
RSM.
2. Speak directly into the RSM.
3. Release the PTT when finished.
Note:
Connecting the RSM to the radio does not disable
the
radio’s microphone and PTT.
Removing the RSM
1. Unscrew and remove the RSM connector from the radio
side connector.
2. Remember to keep the rubber seal inserted in the
RSM’s 3.5mm jack when a secondary accessory is not
being used.
6871518M01.book Page 4 Wednesday, May 27, 2020 11:34 PM
