9A
9B
EN
EN
06. COMPONENTS TEST
24V MOTOR
AUTOMATISM
Motor rotates to
one direction
(eg: right)
24Vac Battery
Motor’s wires
24Vac Battery
24Vac Battery
Motor rotates in
the opposite
direction
(eg: left)
To detect which are the components with problems in a
24Vdc TELICA
automatism instalation, it's some-
times necessary to run a test directly to a external power supply (another 24Vdc battery).
The diagram below shows how to connect the motor to the battery.
All tests must be performed by qualified personnel due to serious danger associated
with the misuse of electrical systems!
NOTES:
• To make these tests it isn't necessary to remove it from the location where it is installed, be-
cause in this way, you can understand of the automatism works properly directly connected
to the external battery.
• Once you connect the wires to a battery 24V, the motor must work for one direction. To test
the opposite movement, change the position of the wires connected to the battery.
07. MAINTENANCE
MAINTENANCE
These maintenance measures must be applied every year in order to insure proper functioning
of the automated system.
• LUBRICATE PINS
Place a small amount of lubricant on the
holes that contains support pins.
• CHECK MOTOR SUPPORTS
Make sure that supports remain well fixed on the
pillars and gate to ensure proper functioning of
the equipment.
