2A
EN
01. SAFETY INSTRUCTIONS
GENERAL WARNINGS
•This manual contains very important safety and usage information.
very important. Read all instructions carefully before beginning
the installation/usage procedures and keep this manual in a safe
place that it can be consulted whenever necessary.
•This product is intended for use only as described in this manual.
Any other enforcement or operation that is not mentioned is
expressly prohibited, as it may damage the product and put
people at risk causing serious injuries.
•This manual is intended firstly for specialized technicians, and
does not invalidate the user’s responsibility to read the “User
Norms” section in order to ensure the correct functioning of the
product.
•The installation and repair of this product may be done by
qualified and specialized technicians, to assure every procedure
are carried out in accordance with applicable rules and norms.
Nonprofessional and inexperienced users are expressly prohibited
of taking any action, unless explicitly requested by specialized
technicians to do so.
• Installations must be frequently inspected for unbalance and the
wear signals of the cables, springs, hinges, wheels, supports and
other mechanical assembly parts.
• Do not use the product if it is necessary repair or adjustment is
required.
• When performing maintenance, cleaning and replacement of
parts, the product must be disconnected from power supply. Also
including any operation that requires opening the product cover.
•The use, cleaning and maintenance of this product may be carried
out by any persons aged eight years old and over and persons
whose physical, sensorial or mental capacities are lower, or by
persons without any knowledge of the product, provided that
these are supervision and instructions given by persons with
experienced in terms of usage of the product in a safe manner
and who understands the risks and dangers involved.
• Children shouldn’t play with the product or opening devices to
avoid the motorized door or gate from being triggered involuntarily.
WARNINGS FOR TECHNICIANS
• Before beginning the installation procedures, make sure that you
have all the devices and materials necessary to complete the
installation of the product.
• You should note your Protection Index (IP) and operating
temperature to ensure that is suitable for the installation site.
• Provide the manual of the product to the user and let them know
how to handle it in an emergency.
• If the automatism is installed on a gate with a pedestrian door,
a door locking mechanism must be installed while the gate is in
motion.
• Do not install the product “upside down” or supported by elements
do not support its weight. If necessary, add brackets at strategic
points to ensure the safety of the automatism.
• Do not install the product in explosive site.
• Safety devices must protect the possible crushing, cutting,
transport and danger areas of the motorized door or gate.
• Verify that the elements to be automated (gates, door, windows,
blinds, etc.) are in perfect function, aligned and level. Also verify
if the necessary mechanical stops are in the appropriate places.
•The central must be installed on a safe place of any fluid (rain,
moisture, etc.), dust and pests.
• You must route the various electrical cables through protective
tubes, to protect them against mechanical exertions, essentially
on the power supply cable. Please note that all the cables must
enter the central from the bottom.
• If the automatism is to be installed at a height of more than 2,5m
