5A
5B
EN
EN
Program new remote control (1 key):
01
•
Press and hold the
OPEN
key of the remote control you want to program.
02
•
Connect the control board to a 100-230V power supply.
03
•
Keep the
OPEN
key pressed for 10 seconds, during which the control board emits 5 slow beeps.
04
• After these 10 seconds, the control board emits 3 quick beeps.
05
•
Keep the OPEN key pressed for another 6 seconds, during which the control board emits 3 slow
beeps.
06
• After a total of 16 seconds (10+6), the control board emits 3 quick beeps confirming the success of
the programming.
07
•
If you want, you can add more remote controls for 10 seconds. If you press a remote control that has
already been programmed, you will hear long, fast beeps
.
08
•
After 25 seconds without any activity, the programming exits, signaled by 3 beeps.
Program a new remote control (3 keys) through another already programmed:
01
•
Press and hold the
OPEN
key of an already programmed remote control for 15 seconds.
02
•
After 15 seconds, the control board emits 5 quick beeps. Release the key of the remote control already
programmed (if you continue to press the key, the control board will signal with long and fast beeps).
03
•
Press and hold the
OPEN
key of the remote control you want to program.
04
• Keep the
OPEN
key pressed for 10 seconds, during which the control board emits 5 slow beeps.
05
•
After 10 seconds, the control board emits 3 quick beeps confirming the success of the programming.
Release the remote control key to finish programming the 3 keys.
06
•
If you want, you can add more remote controls for 10 seconds. If you press a remote control that has
already been programmed, you will hear long, fast beeps.
07
•
After 10 seconds without any activity, the programming exits, signaled by 3 beeps.
04. PROGRAMMING
REMOTE CONTROL PROGRAMMING
PROGRAMMING OF REMOTE CONTROLS THROUGH 1 ALREADY PROGRAMMED
Program a new remote control (1 key) using another already programmed:
01
•
Press and hold the OPEN key of an already programmed remote control for 15 seconds.
02
•
After 15 seconds, the control board emits 5 quick beeps. Release the key of the remote control already programmed.
03
• Press and hold the OPEN key of the remote control you want to program.
04
• Keep the OPEN key pressed for 10 seconds during which the control board emits 5 slow beeps. After this
time, the control board emits 2 quick beeps.
05
•
Keep the OPEN key pressed for another 6 seconds, during which the control board emits 3 slow beeps.
06
•
After a total of 16 seconds (10+6), the control board emits 3 quick beeps confirming the success of the programming.
07
•
If you wish, you can add more remote controls for 10 seconds. If you press a remote control that has
already been programmed, you will hear long, fast beeps.
08
•
After 10 seconds without any activity, the programming exits, signaled by 3 beeps.
If the remote control already programmed has 3 keys, press the up key. If only one key, press
the programmed key
04. PROGRAMMING
DELETE REMOTE CONTROLS
Delete all remote controls using a remote control already programmed:
01
•
Press continuously the OPEN and CLOSE keys of an already programmed remote control.
02
•
Connect the control board to a 100-230Vac power supply.
03
• Keep the OPEN and CLOSE keys pressed for 10 seconds, during which the control board emits 5
slow beeps.
04
•
After 10 seconds, the control board emits 1 beep for 2 seconds confirming the success of the
programming.
01
•
Press and hold the CLOSE key of an already programmed remote control.
02
•
Connect the control board to a 100-230Vac power supply.
03
• Keep the CLOSE key pressed for 10 seconds, during which the control board emits 5 slow beeps.
04
•
After 10 seconds, the control board emits 1 long beep for 2 seconds confirming the success of the
programming.
CHANGE MOTOR DIRECTION
