10A
10B
12
12
13
15
14
EN
EN
05. PROGRAMMING
05. PROGRAMMING
INITIAL SETTING
INITIAL SETTING
12 •
This parameter allows you to
select the type of trigger we will
use. The reader will recognize a
tag if there are links and a set
interval time. In case we have no
shot, we use the "Close" mode.
13 •
Select "EPC (GEN2) SINGLE TAG"
in "CARD TYPE".
14 •
In this parameter you can set
the interval time when reading
different tags.
Example:
If you set 50 every 50ms,
the antenna will try to read any
tag in their reach.
15 •
In this parameter you can set
the time frame for reading the
same tag.
Example:
When a vehicle
approaches an antenna, the tag
is recognized and the opening
order occurs. While the opening
is in progress, that vehicle's tag
remains detectable but does not
execute a new order for the time
you set in this parameter.
