background image

2A

EN

GENERAL WARNINGS

•This manual contains very important safety and usage information. 

very important. Read all instructions carefully before beginning the 

installation/usage procedures and keep this manual in a safe place 

that it can be consulted whenever necessary.

•This product is intended for use only as described in this manual. Any 

other enforcement or operation that is not mentioned is expressly 

prohibited, as it may damage the product and put people at risk causing 

serious injuries.

•This manual is intended firstly for specialized technicians, and does not 

invalidate the user’s responsibility to read the “User Norms” section in 

order to ensure the correct functioning of the product.

•The installation and repair of this product may be done by qualified 

and specialized technicians, to assure every procedure are carried 

out in accordance with applicable rules and norms.  Nonprofessional 

and inexperienced users are expressly prohibited of taking any action, 

unless explicitly requested by specialized technicians to do so.

• Installations must be frequently inspected for unbalance and the 

wear signals of the cables, springs, hinges, wheels, supports and other 

mechanical assembly parts.

• Do not use the product if it is necessary repair or adjustment is required.

• When performing maintenance, cleaning and replacement of parts, the 

product must be disconnected from power supply.  Also including any 

operation that requires opening the product cover.

•The use, cleaning and maintenance of this product may be carried out by 

any persons aged eight years old and over and persons whose physical, 

sensorial or mental capacities are lower, or by persons without any 

knowledge of the product, provided that these are supervision and 

instructions given by persons with experienced in terms of usage 

of the product in a safe manner and who understands the risks and 

dangers involved.

• Children shouldn’t play with the product or opening devices to avoid 

the motorized door or gate from being triggered involuntarily.

WARNINGS FOR TECHNICIANS

• Before beginning the installation procedures, make sure that you have 

all the devices and materials necessary to complete the installation of 

the product.

• You should note your Protection Index (IP) and operating temperature 

to ensure that is suitable for the installation site.

• Provide the manual of the product to the user and let them know how 

to handle it in an emergency.

• If the automatism is installed on a gate with a pedestrian door, a door 

locking mechanism must be installed while the gate is in motion.

• Do not install the product “upside down” or supported by elements do 

not support its weight. If necessary, add brackets at strategic points to 

ensure the safety of the automatism.

• Do not install the product in explosive site.

• Safety devices must protect the possible crushing, cutting, transport 

and danger areas of the motorized door or gate.

• Verify that the elements to be automated (gates, door, windows, 

blinds, etc.) are in perfect function, aligned and level. Also verify if the 

necessary mechanical stops are in the appropriate places.

•The central must be installed on a safe place of any fluid (rain, moisture, 

etc.), dust and pests.

• You must route the various electrical cables through protective tubes, 

to protect them against mechanical exertions, essentially on the power 

supply cable. Please note that all the cables must enter the central 

from the bottom.

• If the automatism is to be installed at a height of more than 2,5m from 

the ground or other level of access, the minimum safety and health 

requirements for the use of work equipment workers at the work of 

Directive 2009/104/CE of European Parliament and of the Council of 16 

September 2009.

01. SAFETY INSTRUCTIONS

Содержание KVM105










Отзывы: