7
2
3
4
4
6
6
B
D
A
C
4
6
7
1
3
A
B
C
D
B
D
A
EN
03. INSTALLATION
FIXATION OF THE LATERAL GUIDES AND TARPAULIN
Press the parts
B
in the indicated area to release them from the lateral guides.
Also remove the guide
C
, keeping only the
AD
set assembled.
Position the
AD
sets on the application structure and define the drilling zones
you want to fix the guides.
Place guide C on the base and fit the tarpaulin into the intended opening.
Refit the tarpaulin roll with motor in the safe profile.
Apply a cover
B
to the guide, from the outside, fitting them through the triggers.
Fit the remaining covers
B
from the inside to each
ABCD
set to lock the assembly
of each guide. Repeat the process for the other side.
Simultaneously drill the
A
guides and the application surface (example: wall,
BRISA SOLAR) in the required areas.
Fix base
A
to the surface with washers and screws.
DISASSEMBLY GUIDES
FIX THE GUIDES
FIT TARPAULIN
1
2
6
5
4
7
3
Each lateral guide is made up of five parts:
Part A •
1 base
Part B •
2 side covers
Part C •
1 inner guide for the tarpaulin
Part D •
1 plastic cover
You must pay attention to the rubber strip on the C guide, ensuring that they
are well applied and that they do not have creases.
