2
Connect the terminals of the black wire under the steering wheel and the terminal
on the dashboard.
Insert the steering wheel on the steering wheel column. Align steering wheel
column holes with the steering: nut fits into hole, bolt into round hole.
Insert the rearview mirrors in the direction shown by the arrow, then press tightly.
Batteries
6V7Ah rechargeable battery pack for the car (included) and 3 batteries AA 1.5V
for the transmitter (not included).
REPLACING THE BATTERY
TRANSMITTER
Unscrew the cover of the battery compartment and insert 3AA batteries taking
care to position the positive and negative poles correctly. Replace the battery
compartment cover and screw into place. Insert the antenna in the appropriate
housing on the top of the transmitter ensuring that is screwed until fully secure.
For best performance ensure that the antenna is pointing towards the vehicle at
all times. Move the ON/OFF switches of the transmitter to the ON position. Whilst
not in use ensure that the ON/OFF switches of the transmitter is in the OFF
position. Distance range 20 mt.
RECHARGING THE BATTERY
Warning! Battery recharging and any other operation on the electrical
system must be carried out by adults only. The battery charger is not a
toy. Keep out of the reach of children. Only use the batteries specified by the
manufacturer. Only use the charger specified by the manufacturer. Inspect the
battery charger before use. In the case of damage do not use. Contact an
authorised assistance centre for repair or replacement. Before using the vehicle,
for the best results, battery pack should be recharged for at least 10 hours. In
order to prolong the battery life, recharge it after every use and before storage.
When the vehicle moves slowly, recharge it immediately as showed in the picture.
After a prolonged period of stop, recharge the vehicle to avoid battery damage (1
recharge every 12 months at least). Never recharge the battery upside down. Do
not forget batteries during charging. Check them periodically. Battery polarity
must be observed when connecting battery to wiring.
FIGURE 1
