Attaching and removing the
RCMI
main unit on your helmet
With the clip, you can easily mount the main unit of the BIM on a helmet within 3 minutes.
Step:
1) Find the best position on the
left
side of your helmet to put the clip
2) Insert the inserted plate between shell and foam of the helmet
Fix the clip on the helmet
with the screws
3) Hang the main unit of the
RCMI
on the clip.
Insert the plate between the shell and the foam of a helmet, fix with screws.
Clip fixed on helmet
RCMI
mounted on a helmet
Note: 1)
If the shell of your helmet is a little thick, you could put the Spacer between the clip and the inserted plate.
2)
There are some helmets that the shell is very thick, maybe it is difficult to fix above clip on these helmets.
In this case, you could use below clip with the 3M tape.
----------------------------------------------------------------------- 6 ---------------------------------------------------------------------