Tips:
Talk with unit D
Because there is not
D
key on the unit, the way of calling unit
D
is different
:
Short press
A
key on unit
A
, and you will connect with unit
D.
Short press
B
key on unit
B
, and you can talk
with unit
D.
…Short press C key on unit C , you will talk with
D.
Finish an interphone talk:
You only need a short press of same unit of an intercom (A, B, C) key, to terminate communication.
Note:
to reduce power consumption, when you do not need to talk, don't keep your
RMCI
in the intercom
state .
Note: If two
RCMI’
s
were out of range, they may lose connection. When you come within range
again you only need to initiate a intercom call as normal.
Music /Audio function
1) Listen to audio navigation from your GPS with a built in Bluetooth transmitter.
a)
Pair GPS with your
RCMI
Be sure that you have turned off the Bluetooth function on your mobile phone.
Be sure that the
RCMI
is in the state of power off.
Refer to your GPS instruction booklet for Bluetooth pairing process. When the GPS is ready for pairing
long press the POWER/Rider
A
key on the
RCMI
, until the red & blue LED flash.
Several seconds later, the GPS and the
RCMI
will have finished the pairing process.
2) Listen to stereo music from your A2DP enabled mobile phone
Read the user manual of your mobile phone carefully, if your mobile phone is A2DP enabled, the
RCMI
can
receive the stereo music from your mobile phone.
Please note that only A2DP (stereo Bluetooth) enabled mobile phones can offer a Bluetooth music transmitting
service. You can use the Phone/Play key to pause/play the music from A2DP Bluetooth devices.
-------------------------------------------------------------------------- 12 ---------------------------------------------------------------------