background image

                                                                                

 

© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A. 

Phone: 248.313.0272 

 Fax: 248. 313.0271 

        

REVISION 1.0 09-24-09

                             

www.motorcitywashworks.com

                                                 

5

 

 

 

   Warranty and Return Procedure: 

                 

 

 

 
 
Motor City Wash Works

 warrants this product to be free of defect in material and/or workmanship for a period of 

one year

 from the date purchase. During the warranty period MCWW will at its discretion, at no charge to the 

customer, repair or replace this product if found defective, with a new or refurbished unit, not to include costs of 
removal or installation. Any product returned to MCWW for warranty has to have a 

Return Material Authorization 

Number

. All shipping costs to MCWW are assumed by the customer. This is only a summary of 

MCWW’s Limited 

Warranty

. Please, communicate with MCWW for our complete warranty. 

Prior

 to returning any product to MCWW, the customer must call in for a 

Return Material Authorization Number

 

and a copy of our 

Return Material Authorization 

Form must be completed. The 

RMA

 number must be written 

clearly on the outside of the shipping package and copy of the form must be included in the package.  

Содержание Wanner HPPREPSYSTEM004






Отзывы: