![background image](http://html.mh-extra.com/html/motomaster/299-6912-4/299-6912-4_instruction-manual_1838382004.webp)
TM/MC
3
OPERATING INSTRUCTIONS 12 V DC MODE
OPERATING INSTRUCTIONS 120 V AC MODE
NOTE
OPERA
TING
1
2
3
6
5
4
1
2
3
6
5
4
Place inflator on flat surface.
Insert the 12 V DC power cord into 12 V DC power outlet. This will automatically
provide continuous 12 V current to your inflator.
Connect the quick-connect valve adaptor to item you are inflating and push down
the valve lock lever to secure the connection.
Push the button of 12 V, position. ( See Image #1 below).
The pressure gauge will display the current pressure of the item you are inflating.
Disconnect inflator from 12 V DC power outlet.
Image #1
DO NOT OVERINFLATE ITEM BEING INFLATED.
ALLOW COMPRESSOR TO COOL FOR 20 MINUTES AFTER 5 MINUTES OF CONTINUOUS OPERATION
WHEN OPERATE WITH 120 V AC MODE, THE INFLATOR WOULD AUTOMATICALLY SHUT OFF IN
CASE THE TEMPERATURE EXCEEDS 100°C
,
AND THEN RE-START AFTER THE THE INFLATOR
COOL DOWN BELOW 75°C.
Place inflator on flat surface.
Connect an extension cord (not included) to the AC plug, and then connect the
extension cord to a grounded 120 V AC outlet.
Connect the quick-connect valve adaptor to item you are inflating and push down
the valve lock lever to secure the connection.
Push the button of the 120 V, position. (See Image #1 above).
The pressure gauge will display the current pressure of the item you are inflating.
Disconnect inflator from power outlet.