CAUTION!
Only use the cables provided with your power inverter.
• Screw off the caps of the DC cabling terminals (B / C).
• Connect the cable with the DC cabling terminals (B / C).
CAUTION!
Make sure to connect the
RED CABLE TO POSITIVE PORT
(+) and the
BLACK CABLE TO
NEGATIVE PORT
(-).
• Place the red cable connector on the positive DC cabling terminal (+ / red). Make sure that
the respective holes are matching. Screw the red cap back on the cabling terminal until the
•
• Place the black cable connector on the negative DC cabling terminal (- / black). Make sure
that the respective holes are matching. Screw the black cap back on the cabling terminal
PO) RED
CABLE CONNECTOR
Connecting the power converter.
CAUTION!
Prior to connecting to the power source:
Make sure that the total wattage of the devices you are planning to connect to the mobile
power outlet does not exceed the maximum load of the respective power outlet.
LOAD CONNECTED (W)
CONNECTION WITH
12 V OUTLET PLUG
CONNECTION WITH
VEHICLE BATTERY
Continuous load under 100 W Yes
Yes
Continuous load between
100 and 400 W
No
Yes
Connecting the connector cables to the power inverter.
< 100 W
< 400 W
• Make sure that the power inverter is switched off by verifying that the on/off switch (H) is
set on the "O" position.
• Choose the DC cable (I / H) suitable for connecting the AC products that you want to operate.
16
model no. 011-2038-4 | contact us: 1-877-466-8191
17
OPERATION
OPERATION
