headline bars
tabs
con
tinua
tion tabs
not
es
w
ar
nings
headline bars
tabs
continuation tabs
notes
warnings
7
headline bars
tabs
continuation tabs
notes
warnings
Insert three more Lag Screws (5) and
Washers (6) in each frame to secure in
place. Do not tighten Lag Screws (5)
completely at this time.
Note:
Don’t use an impact driver.
Connect each two Round Tubes (3)
using the Tube Adaptor (4). Place one
Round Tube Assembly at the back of
the rack at the desired height to protect
the wall from tire rub. Attach both ends
to Left Frame (1) and Right Frame (2)
using the Hex Bolts (6) and Washers (7).
Attach the remaining two Round Tube
Assemblies to Left Frame (1) and Right
Frame (2) at the desired positions, so
the tires can sit deeply enough to stand
upright securely, using the Hex Bolts (6)
and Washers (7).
Now fully tighten Lag Screws (5) into
the wall studs using a 13 mm Wrench
(not included).
Note:
Don’t overtighten the Lag Screws
(less than 10 ft-lb). Do not use an
impact driver.
Check for tightness of all hardware,
now the Tire Rack is ready for use.
4
5
6
ASSEMBL
Y
STEP 4
1
6 5
2
6 5
STEP 5
1
2
4
3
3
7
8
STEP 6
