Page 10
Page 11
Using the Upper Bag Supports / Adjusting the Bag Supports
Using the Upper Bag Supports
The upper bag support straps can be secured using the same steps as the non-EASILOCK
instructions overleaf:
1. Stretch the elasticated strap around the bag
2. Loop the rounded bar underneath the hook (fig. 2 left)
3. Position the two placement straps centrally on your cart bag (fig. 3 left)
Adjusting the Bag Supports
The bag support straps are manufactured from elasticated material to allow your golf bag
to be held tightly in place.
The strap should be adjusted to be reasonably tight around the golf bag:
1. Unclip the elasticated straps from the housing by pulling outwards
in the direction shown by the arrows (fig. 1)
2. Move the bar as required to tighten or loosen the strap fitting.
Pulling the bar downwards will tighten, pushing it upwards will loosen (fig. 2)
3. Ensure that the straps are clipped back in to the housing before use (fig. 3)
Fig 1
Fig 2
Fig 3
Fig 1
Using the Lower Bag Supports
Using the Lower Bag Supports
This Motocaddy trolley is fitted with the new EASILOCK™ bag attachment system.
If you are using an EASILOCK™ compatible cart bag please follow these simple instructions:
1. Remove the two pre-fitted lower bag straps by depressing the rear button and sliding (fig. 1)
2. Match up the indicating line on your cart bag with the line on the lower bag support
3. Lower bag until the pins lock in position
If you are using a non-
EASILOCK™
bag, please use the following instructions:
1. Stretch the elasticated strap around the bag
2. Loop the rounded bar underneath the hook (fig. 2)
3. Position the two placement straps centrally on your cart bag (fig. 3)
Please ensure the straps are hooked in place securely before releasing.
Failure to do so could result in injury to the user.
Fig 2
Fig 3
