Page 4
Page 5
Battery Care and Advice
Battery Care and Advice
All batteries must be charged as soon as possible after each use.
Please ensure that only batteries supplied by Motocaddy are charged with Motocaddy chargers. Cyclic battery chargers are
designed specifically in accordance with the battery manufacturer’s requirements. The Lithium battery charger MUST NOT
be used to charge any other battery and is designed for use with Motocaddy Lithium batteries only.
The charger should only be connected to an earthed socket outlet; the battery charger should only be opened and maintained
by authorised personnel. Unauthorised opening will invalidate your warranty.
The battery must be stored and charged on a dry non-carpeted surface and charged at temperatures ranging between
10°C and 30°C. Charging above or below these temperatures is not recommended as it can reduce the battery capacity.
When connecting your battery to the trolley, please ensure that the connections match up black to black and blue to blue.
Installing the Remote Handset batteries
The remote handset requires 3 AAA Batteries (Included with the manual).
To fit the batteries:
1. Remove the two screws on the back of the handset (fig 1) using a Phillips screw driver
2. Lift and remove the back cover
3. Insert the three batteries as shown (fig 2)
4. Replace the back cover ensuring the top hooks in to place and secure with the two screws
Fitting the Remote Handset belt clip
The remote handset comes with an optional belt clip.
To fit the belt clip to your handset:
1. Remove the rubber bung by lifting it out
2. Place the clip in to the back and rotate 90˚ clockwise to secure (fig 3)
Installing Handset batteries / Fitting Handset belt clip
Fig 1
Fig 3
Fig 2
