Yamaha Grizzly 550/700
Winch Mount Kit
MA11927
23001 Industrial Blvd Rogers, MN 55374
866.527.7637 (toll free) 2 [email protected]
tight. If mounting a VIPER MAX 3500-4500lb series,
you will need to move it slightly off-center with the help
of the slotted holes in order to clear your brushguard
tubing. This will not affect winch performance.
5. Attach the front of the mounting plate with the two
M10 X 1.25 X 16mm hex flange head bolts, and
two M10 X 1.25 hex flange head nuts, finger
tighten at this time.
6. Attach the rear of the mounting plate with the two
M10 X 1.25 X 16mm hex flange head bolts. Tighten all
four mounting bolts at this time.
7. Route the black and red battery winch wires up
the left side of the frame and into the battery area.
At the same time, route the rocker switch harness
down beside the battery winch wires and plug the
connectors into the contactor connectors. Gather
all wires and cable tie them neatly away from any
moving suspension parts or any sharp edges.
FIGURE TWO
FIGURE THREE
FIGURE ONE