User Manual of VINASHIN MOTOR EFI fault diagnostic scanner
3
Notes
This manual is a necessary part of the tool. It contains its technology features
and functions. Please reading the manual carefully before you use the tool or
store it.
1. When the engine is working, please make sure that the indoor is ventilation or
connect the exhaust gas equipment to the vehicle’s exhaust system. We do
this because the carbon monoxide produced by the engine is toxic gas what
no color and odorless, excess intake by people will lead to serious results even
die.
2. Before use the diagnostic scanner, please make sure the motorcycle has been
parked in a stable state and don’t use the scanner during driving process.
3. When you operate the diagnostic scanner during the engine running, please
keep enough distance from any running parts of the engine or the driving belt.
Because the running parts of engine or the driving belt may engulf clothes, the
connecting line of the diagnostic scanner or any part of the Conner’s body to
lead serious hurt.
4. Unless there is other operation direction, you must turn off
the ignition switch
when connecting or removing the line of electronic circuit components.
5.When the engine is running, please don’t touch the ignition coil, the ignition
coil terminals or the spark plug, which can produce very high voltage.
6. Although the diagnostic scanner has a safety design that the battery can
prevent from being connected reverse, but we still strongly remind you must
make sure the battery polarity before you connecting the scanner.
7. Never put the diagnostic scanner on the battery. Because it is very likely to
lead battery short-circuit, and cause personnel hurt, equipment damage and
vehicle trouble.
8. Please don’t touch the exhaust, engine or radiator system when it is running
or just finished running. If you have to touch the hot parts, please wear the
tested heat-resistant gloves to avoid burn.
9. Please don’t expose the scanner in the flammable gas or steam.
10. This diagnostic scanner belongs to precise electronic product, please don’t
unweave or repair it by yourself.
11. If there is any change in the actual producing, we won’t give a prior notice.
