Motive NEO-WiFi Series, Руководство пользователя

Страница: 114 / 128

114/128 NEO-WiFi – Handbuch - DE REV15-DEC18
29 R/W Control mode 0 4
0 = Speed;
1 = Speed+Encoder;
2 = Ventilation;
3 = Compressor;
4 = HP Pump.
30 R/W proportional factor 0 100
31 R/W integral factor 0 100
32 R last alarm recorded 0 6539
33 R/W Braking Joules J/100 1 127
34 R/W Modbus code 1 127 Inverter code in Modbus communication
35 R/W Stop power for dry operation stop %Pn 20 100
36 R/W clock h seconds*0x10000 0 0xffff
To calculate follow this calculation:
minutes * 60= result
(Hour * 60 * 60)= result 1
result 1 + (Day * 60 * 60 * 24)= result 2
result 2 + (Month * 60 * 60 * 24 * 32) =result 3
result 3 + (Year * 60 * 60 * 24 * 32 * 13) =result 4
For the year write only the last two digits, for example 2014 must be
14
result 4 /65536= clock h without decimals
If there are problems during calculation, please download the
spreadsheet automatically from www.motive.it
37 R/W clock l seconds 0 0xffff
To calculate follow this calculation:
minutes * 60= result
(Hour * 60 * 60)= result 1
result 1 + (Day * 60 * 60 * 24)= result 2
result 2 + (Month * 60 * 60 * 24 * 32) =result 3
result 3 + (Year * 60 * 60 * 24 * 32 * 13) =result 4
For the year write only the last two digits, for example 2014 must be
14
result 4 / 65536 = clock h without decimals
result 4 – (clock h*65536 )= clock I without decimals
lf there are problems during calculation, please download the
spreadsheet automatically from www.motive.it
38 R/W magnetization % 80 120
39 R/W T R fault stop 0 1
0=OFF, 1=ON;
When this function is ON, it switches off the motor if:
-The T/R radio communication between keypad and NEO is missing
for more than 5 seconds;
-The modbus communication (Variable 40=2) loses the signal from
serial port RS485;
40 R/W modbus communication 1 2
0 =OFF, 1=ON+KEY, 2=ON
OFF = programming and operation only from keypad
ON+KEY = programming from modbus and operation from keypad
(External remote wired control/speed signal are included),
ON=motor is commanded by Modbus
ON = programming and operation only from modubs
41 R/W baud rate bit/s 0 3
0 = 4800
1 = 9600 (Default)
2 = 14400
3 =19200 bit/s
42 R status rotation 0 2
It's the position set on selector, received from the keyboard
0=OFF
1=direction 1
2=direction 2
43