Certain models in the RotorScale 450 PNP Lineup also include scale accessories such as antennas, ordnance, and
horizontal stabilizers or tail fins. These cosmetic items are not required to fly the model. Basic modeling skill is
required to install them using epoxy or hot glue. For horizontal stabilizers or tail fins, epoxy is recommended, in
addition to boring small holes into both surfaces to strengthen the glue bond between the fin and the fuselage
itself. Cyanoacrylate (“CA”) glue is not recommended due to poor adhesion on the fiberglass fuselage.
For visual reference and additional tips to install your scale accessories and waterslide decals, refer to the
Overview Video of your helicopter on its product page at
MAINTENANCE SCHEDULE
Regular maintenance is essential to prevent vibration and other damage-causing component failures. Conducting
pre-flight and post-flight inspections will help identify loose screws, tight bearings, etc. Service as needed.
CONCLUSION
Your RotorScale 450 PNP Sport Scale Series Helicopter has been designed to provide you with many flights of
enjoyment. Thank you for the opportunity to earn your business with this unique and new RC PNP model category
at Motion RC. Please contact our friendly tech support teach at
for any questions or concerns
you may have regarding this product.
Required Safety Actions
•
Never plug in the flight battery before the radio transmitter is powered on
•
Never plug in the flight battery before the radio transmitter is set to the correct Model
•
Never power off the radio transmitter while the flight battery is plugged in
•
Never fly this product indoors
•
Never fly this product within 50 meters of trees, buildings, property, or other people
•
Always fly this product in a safe and legally designated area for RC Model Aircraft
•
Always keep this product dry and clean
•
Always use a properly and fully charged 6s 25.2V lipo 1100mAh battery
•
Always conduct the Basic Pre-Flight Inspection and Post-Flight Inspections
224-633-9090
