www.motionrc.com
Motion RC User Guide for the Detrum RXC8 Receiver
Page 2
Review the Receiver’s Ports, Controls, and Connection
Orientation
The RXC8 has the following ports:
•
PPM/AILE—Pulse Position Modulation (used to connect to a PPM flight controller) or
ailerons (this manual covers only using this port to connect to servos)
•
ELEV—elevator
•
THRO—throttle/ESC
•
RUDD—rudder (and steering in many models)
•
GEAR—retracts
•
AUX1—auxiliary, such as for flaps
•
AUX2—auxiliary, for example, an independent steering servo or brakes
•
AUX3—auxiliary, for example, to control a gyro
You can program some of these ports, such as the AUX ports, to be controlled by specific
switches on the transmitter. For example, you might want to use the AUX1 port for flaps and
program a three-position switch on the transmitter (for example, the FMOD switch on the
GAVIN-6C transmitter) to control this port.
You use the Bind/Mode button to bind the receiver and change its mode.
