1
1
3
3
3
1
1
3
3
3
1
1
3
3
3
1
1
3
3
3
1
1
3
3
3
+
+
16
15.1
15.2
15.3
16.3
16.4
16.5
16.1
15.4
15.5
15
16.2
1
1
1
1
1
1
+
1
1
14
14.1
14.3
14.2
14.4
14.5
MOTION
CM-35 ELECTRONIC CURTAIN MOTOR
MOTION
CM-35 ELECTRONIC CURTAIN MOTOR
Channel select makes it possible to copy blinds in between channels/remotes without having
to physically press the program button on the motors.
To activate
channel select
simultaneously
hold the
channel
selection
button
and press the
pair
button.
Press the pair
button on the (new)
remote to pair the
blinds to the new
channel.
To exit channel
select go back to the
channel selected at
step 15.1 and repeat
step 15.2
All blinds in the selected
channel will start
stepping, indicating
program mode has been
activated. All blinds
can be copied to a new
channel on the same
remote or other remote.
Select a new channel on
the (new) remote.
Channel select makes it possible to copy blinds in between channels/remotes without having
to physically press the program button on the motors.
Select the channel
you would like to
copy.
To activate
channel select
simultaneously hold
the
channel
selection
button and press the
pair
button.
Press program
button on the (new)
remote to pair the
blinds to the (new)
remote.
To exit channel
select choose
the channel you
selected at step 16.1
and repeat step 16.2
All blinds in the selected
channel will start
stepping, indicating
program mode has been
activated. All blinds
can be copied to a new
channel on the same
remote or to other
remotes. Select a channel
on a (new) remote.
Channel select 5 channel remote
Channel select 15 channel remote
Select the channel
from which the
blinds must be
copied.
The remote starts
searching for blinds
(search mode). This
is indicated by the
horizontal bars on the
remote.
To activate Single
select simultaneously
hold the
center
button and press the
pair
button.
Single select makes it possible to activate program mode on a single blind through a
remote control, without having to physically press the program button on the blind.
To search for
the next blind
press the
right
button. Search
mode will be
activated.
To find the
previous blind
press the left
button.
To exit Single
select press
the
right
button during
search mode.
The display
shows the
letter
O
.
Once a blind is found
the channel number
will flash and the
blind starts stepping,
indicating that
program mode has
been activated. The
blind can now be (un)
paired to the remote
and/or programmed.
Single select 15 channel remote
English
22
23
