Motion CM-07, Руководство пользователя

Страница: 23 / 124

MOTION
C M - 0 7 D C M I D M O T O R
Frequently Asked Questions
Problem Cause Solution
Blind does not work.
Power supply is not connected or
the rechargeable battery is empty. Connect the power supply to the motor
or charge the rechargeable battery tube.
Remote battery is empty. (LEDs on remote
are flashing rapidly.) Replace the battery in the remote.
See the manual of the remote.
Remote battery is inserted incorrectly. Replace the battery in the remote.
See the manual of the remote.
Radio-frequency interference Make sure that the antenna of the motor is
out of the way of metal objects.
The distance from the remote to
the motor is too far. Move closer to the motor.
The remote is not connected to
the blind. Pair the remote with the motor.
See step 3.
Multiple blinds respond to a
remote. (Unable to program a
single blind) Multiple blinds are paired with a single
channel. Pair the blind with a free channel to
program or use single select to program
the blind.
Blind moves in small steps.
1) No end limits are programmed.
2) Direct control is deactivated. 1) Program end limits. See step 5 - 8.
2) Activate direct control. See step 14.
Favourite position can not
be programmed. No end limits are programmed. Program end limits . See step 5 - 8.
Blind lowers too far. End limits are programmed incorrectly. Reprogram end limits. See step 5 - 8.
Blind moves in the opposite
direction. The rotational direction has been
set incorrectly. Change the rotational direction.
See step 4.
The blind keeps moving up and
down.
The blind is in program mode.
Press the program button on the motor
to exit program mode.
English