Motion Healthcare eFlexx, Руководство пользователя

Страница: 32 / 40

7. CARE AND MAINTENANCE
31 32
Seat Upholster:
Only use damp cloth and a mild soap to wipe the seat. Do not use abrasive cleaners as
this will damage the seat. Do not sit until the seat dries out.
Frame / Shroud:
Only use damp cloth to wipe. Do not use abrasive cleaners as this will damage the parts.
When scooter dries out, the shroud can be applied with a light of wax to keep its gloss.
Tyre:
Only use damp cloth to wipe. Do not use abrasive cleaners as this will damage the parts.
User should inspect the tyres frequently for damage, the presence of foreign bodies,
unusual wear and sufficient tread depth. If replacement of tyres are needed, please contact the
nearest dealer.
The following areas require periodic inspection: Tread depth drops below 0.5 mm.
Storage:
• If store the scooter in long time (one week or more), please disconnect the battery
terminals and do not connect battery terminal [+] [-] with any metals to avoid danger.
• When store scooter, make sure the power is off, seat lock is fixed, and N-D lever is in D
position to engage brake to avoid roll-away.
• Please store the scooter in a dry location. Do not store your scooter where it will be
exposed to source of direct heat, damp, oil, acid, alkaline, or where Ozone could be
possibly generated. All of the above will minimize scooter / tyre cycle and shorten its
lifetime. Recommended range of storage for the scooter is as below :
• Temperature (with lithium battery) : -20oc ~ +50oc / Humidity : 25% ~ 85%
• Temperature (with lead-acid battery) : -30oc ~ +50oc / Humidity : 25% ~ 85%
• If the storage environment is out of the range, we suggest you to take out the battery
box from scooter and store it respectively.
All maintenance and repair of scooter MUST be done by an authorized dealer. ANY
unauthorized adjustments, repair or service to the scooter may result injury to
yourself or damage to scooter.
Here are some suggestions about solving problems you may have with your scooter. There is a
self-diagnostic warning light on the control panel. To check the self-diagnostic warning light,
turn on the key (power) switch (see section 4-2) and count the number of blinks on the warning
light.