27
28
• Battery Box Charge Port (Figure 32)
1. Remove the battery box from the scooter and place it on a flat ground.
2. Open the charge port cap and connect the charger output cable into the charge port
3. Plug the AC cord of charger into a standard electrical outlet
4. Check the charger LED indicator; make sure it’s in normal charging. During charging, LED will
indicate orange light.
5. When unplug, please make sure to remove the AC cord from the wall first, and then charger
output cable from the charge port.
6. Put the cap back to cover charging port before install the battery box back to scooter.
6. BATTERY GAUGE & CHARGING THE BATTERIES
Figure 32
• Be sure the scooter key (power) is in the OFF position when charging.
• The time needed to recharge will vary depending on the depletion of the
batteries. Charging for longer than necessary will not harm the batteries. It
cannot be over-discharged.
• When remove / install the battery box, please make sure the connectors are in
sequence and in position to avoid electric damage.
• Please keep the above cautions in mind. Any battery / charger faults due to
the unauthorized maintenance, dismantle, misuse or accidental damage is not
covered by the manufacturer’s warranty
• Do not alternatively use lead-acid charger to charge lithium battery, they are not
compatible and may cause damages and dangers if doing so.
