background image

70380-a.11-APEX USER MANUAL-HR

21

   

User

Manual

11.    

Motion Composites limited 

warranty

A. 

Frame – Limited lifetime or 5 years

Motion Composites warrants the carbon wheelchair frame 
against defects in materials and workmanship for life. This 
warranty is limited to the carbon fiber frame and is limited to 
the first user and is not tranferable. Aluminum frame is limited 
to a 5 year warranty. 

B. 

Components – 1 years

Motion Composites warrants all Motion Composites-made 
components against defects in materials and workmanship for 
two (2) year from the date of purchase, except for parts listed 
below.

C. 

Limitations and exclusions

1

  

Motion Composites covers the following items for 30 days:

•     tires and tubes for front or rear wheels, upholstery (including 

cushions, seat slings, armrest upholstery) and push-handle 
grips; 

2

  

This warranty does not cover:

•     damage arising from normal wear and tear or from other 

circumstances beyond Motion Composites’ control; 

3

  

The foregoing warranty shall not apply if:

•     the original Motion Composites serial number tag has been 

removed, altered or defaced; or

4  Use life of the wheelchair and components:

•     the shelf life or use life of the wheelchairs and their 

components could vary pending on the, practice, treatment, 
handling and frequency of use.  Exposure to sun, heat, and 
water could affect the life of the wheelchair. Maintaining 
the wheelchair clean and storing it in a cool, dry area and 
away from the sunlight, will increase the duration of the 
wheelchair;

•            the  wheelchair  has  been  subjected  to  negligence,  accident, 

improper maintenance, storage or operation as required by 
your Motion Composites Owners Manual, commercial or 
institutional use, misuse or abuse, including, but not limited 
to, exceeding the maximum weight capacity of 250 pounds 
(113,4 kg); or

•       the wheelchair has been damaged by improper repairs or 

repairs made to any component without the express written 
consent of Motion Composites; or

•       the wheelchair has been modified without Motion 

Composites’ express written consent, including, but not 
limited to, modification through the use of unauthorized 
parts or attachments; or

•       the wheelchair has been used as a weight training 

apparatus; or

•     the wheelchair’s Transit Tie-Down System (TTDS) has been 

misused; if TTDS is not attached to the four tarpaulin bows 
identified and installed by Motion Composites.

5

     This warranty is extended only to the original consumer 

purchasers of Motion Composites’ product.

IMPORTANT NOTICE REGARDING CONSUMERS 
RIGHTS

The benefits we give in this manufacturer’s warranty are 
additional to, and do not detract from, any rights and remedies 
that you may have under local consumer protection laws.
This manufacturer’s warranty is governed by the laws of the 
country, province, state or territory in which you purchased 
your Motion Composites product.
In many countries, consumers have statutory rights under local 
consumer laws. Those consumer rights may differ between 
countries, territories, states or provinces, and often cannot be 
excluded.
This Manufacturer’s warranty is not intended to:
•   change or exclude any statutory consumer rights that cannot 

be lawfully changed or excluded; or

•   limit or exclude any right you have against the person who 

sold the Motion composites product to you if that person has 
breached their sales contract with you.

D. 

Our responsibility

Motion Composites’ sole obligation and your exclusive remedy 
under this warranty shall be limited to such repair and/or 
replacement. 

E. 

Warranty Service

If your wheelchair requires warranty service, please contact 
an authorized Motion Composites Dealer in Canada or an 
authorized international distributor.  In the event of a defect in 
material or workmanship, the Dealer or Distributor must obtain 
a return authorization (RA) number from Motion Composites.  
Motion Composites issues RA numbers only to authorized 
Motion Composites Dealers and Distributors. In the event that 
you do not receive satisfactory warranty service, please write 
directly to 

Motion Composites Customer Service

 at:

160, Armand-Majeau Sud, Saint-Roch-de-l’Achigan, Qc, J0K 
3H0 
or send an email at: [email protected]

Do not return products to our factory without our prior 
consent. 

CONSUMER 

NOTICE

1

     The foregoing warranty is exclusive, and in lieu of all other 

express warranties, whether written or oral, express or 
implied. Motion Composites shall not be liable for any 
consequential or incidental damages whatsoever. By 
registering your Motion Composites wheelchair, you will be 
deemed to agree with all provisions of this warranty.

2

       It is forbidden to alter or extend the foregoing express 

warranty or to waive any of the limitations or exclusions. 

Содержание APEX

























Отзывы: