11
● MoticEasyScan Pro 6N Connection
a. Please make sure that all power is switch off before connecting.
b. Take reference of system connection diagram (Fig. 4), follow the steps below for connection.
■ Plug one end of USB3.0 line to USB port of scanner and connect the other end to USB3.0 port
of computer.
■ Make sure system power is switch off, plug the power cord to the power socket of the scanner
and connect the other end to a safety rated Power outlet.
2.3 Slide Tray
(Fig. 8a)
2.3.1 Slide Placement Procedure:
2.3.1.1 Slide Loading Procedure:
a. Hold the edge of the sides with the thumb and index finger, follow the direction of Fig.9a, load the
slide under the clip Fig. 8b-
②
with 15 degree angle, then push it to the end .
b. Push the slide with barcode end downward to the direction of clip Fig. 8b-
①
and in the meantime
the other hand move beneath clip of Fig. 8b-
①
to assist the slide goes into the clip.
c. Make sure the slide is pushed against the left side of Fig. 8b-
③
as shown in Fig. 9c
