background image

MC Combo Changetable 

05-13

                                                                                                                                        

9

Instruction Manual & User Guide

TO SECURE YOUR CHILD

• 

The harness straps can be adjusted by moving each strap’s slider.

• 

The buckle is released by squeezing the buckle tongues together. 

Assembling: Combo Changetable

Figure 6

STEP 6 - TO CHECK THAT THE 

                CHANGETABLE IS SAFE TO USE

• 

Stand the unit upright.

• 

Tighten all screws with the Allen Key. Do not over tighten the screws. 

• 

Ensure unit is stable.

• 

Fit a Changing Pad snugly into the table top recess. Recommended size: 750mm long x 500mm  

 

wide x 30mm

 (Max)

 

thick

.

TO APPLY THE BRAKES

• 

Press 

Down

 on the small tab on the castor and 

Up

 to release,

           as per 

Figure 7

.

Figure 7

 

Use this harness at all times. 

STEP 5 - TO FIT THE SWIVEL WHEELS

• 

Insert the castor spindle into the hole in each leg’s end, 

          as per 

Figure 6

 and push in all the way.

•        Check that

 the castors are properly inserted by attempting

          to gently remove them.

Содержание 13208













Отзывы: