3
4
fig 6
fig 7
fig 9
fig 9.1
fig 10
fig 8
Attach the foot to the underside of the
base panel using 2 screw bolts (50mm)
as shown left.
Attach both the large and small end to the assembly using 6 large cam pins, 6 large
cams and 8 dowels as shown above.
Attach the 2 plinth
blocks to the inside
faces of both ends
using 6 (35mm) bolts
as shown left.
Insert 4 bolts (16mm) into each of
the pre-fitted metal inserts in each
end. Ensure the bolts are only
screwed in half way so that they
are easier to locate onto the
brackets.
Slide brackets downwards to
engage onto bolts. Tighten the
bolts to secure the product.
Attach the 2 remaining drawer runners to the inside face of the large end using
the 8 remaining short screws (10mm). Please refer to fig 5 for more detailed
information regarding the position of screws through the holes in the runner.
Finally, fit 1 short screw (15mm) into the upper smaller hole on each bracket as shown in
fig 9.2.
fig 9.2
